Appliance & Industrial 
BS4090HDOR-GEN
BEND SWEEP 90DEG 40mm HD OR
Reviews
Specifications
| LED | Status | Meaning |
| Info LED | Illuminates green | normal operation |
| Flashes red | a fault exists (see “Faults and remedies”) | |
| flashing quickly | battery empty, state of charge < 40 % | |
| Red LED | when the battery continues to be discharged the | |
| deep-discharge deactivation is triggered | ||
| flashing | deep-discharge deactivation, state of charge < | |
| 30% | ||
| Yellow LED | illuminates | battery weak, state of charge < 50 % |
| flashing | switch-on threshold after deep-discharge deactivation | |
| has not yet been reached, | ||
| state of charge is 40 % to 50 % | ||
| 1. green LED | illuminates | battery good, state of charge > 50 % |
| 2. green LED | illuminates | battery full, state of charge > 80 % |
| flashing quickly | battery full, charge regulation active, | |
| i.e. charging current reduced |
| Preparing the wiring | ||||
| Load/module | ||||
| Controller type | current | Cross-section | AWG | Insulation |
| 10:00 AM | 10:00 AM | 6 mm2 | 10 | 85 °C |
| 15 A | 15 A | 10 mm2 | 8 | 85 °C |
| 20 A | 20 A | 10 mm2 | 8 | 85 °C |
| 30 A | 30 A | 16 mm2 | 6 | 85 °C |
Measurements
